RX 350 FWD V6-3.5L (2GR-FE) (2010)
Navigation Display: Overhaul
Disassembly
NAVIGATION / MULTI INFO DISPLAY: REMOTE TOUCH: DISASSEMBLY
1. REMOVE REMOTE CONTROL SWITCH KNOB
(a) Remove the remote control switch knob as shown in the illustration.
2. REMOVE REMOTE CONTROL SWITCH ASSEMBLY
(a) Remove the 6 screws.
(b) Disconnect the connector and remove the remote control switch assembly.
3. REMOVE DOME COVER
(a) Remove the dome cover as shown in the illustration.
4. REMOVE REMOTE CONTROL COVER ASSEMBLY
(a) Disengage the 3 clips and remove the remote control cover assembly.
5. REMOVE REMOTE OPERATION BOARD
Reassembly
NAVIGATION / MULTI INFO DISPLAY: REMOTE TOUCH: REASSEMBLY
1. INSTALL REMOTE OPERATION BOARD
2. INSTALL REMOTE CONTROL COVER ASSEMBLY
(a) Engage the 3 clips and install the remote control cover assembly.
3. INSTALL DOME COVER