RX 350 FWD V6-3.5L (2GR-FE) (2010)
Radio/Stereo Noise Filter: Service and Repair
Installation
Up to 08/2009
AUDIO / VIDEO: NOISE FILTER: INSTALLATION
1. INSTALL RADIO SETTING CONDENSER
(a) Engage the claw to install a new terminal cover to wire harness.
(b) Engage the 3 claws to install a new terminal cover with wire harness to new condenser.
(c) Engage the clamp to temporarily install the new radio setting condenser with wire harness to the back door.
(d) Install the new radio setting condenser with the bolt.
Torque : 8.4 Nm (86 kgf-cm, 74 in-lbf)
2. INSTALL BACK DOOR TRIM PANEL ASSEMBLY See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service and
Repair/Overhaul/Reassembly
3. INSTALL BACK DOOR SERVICE HOLE COVER RH See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service and
Repair/Overhaul/Reassembly
4. INSTALL BACK DOOR SERVICE HOLE COVER LH See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service and
Repair/Overhaul/Reassembly
5. INSTALL BACK DOOR UPPER TRIM COVER RH See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service and
Repair/Overhaul/Reassembly
6. INSTALL BACK DOOR UPPER TRIM COVER LH See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service and
Repair/Overhaul/Reassembly
7. INSTALL NO. 2 ROOM LIGHT ASSEMBLY See: Lighting and Horns/Trunk Lamp/Service and Repair/Installation
8. INSTALL BACK DOOR LOCK COVER See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service and
Repair/Overhaul/Reassembly
9. INSTALL DOOR PULL HANDLE WITH SWITCH (w/ Power Back Door) See: Body and Frame/Doors, Hood and Trunk/Trunk /
Liftgate/Service and Repair/Overhaul/Reassembly
10. INSTALL BACK DOOR FINISH COVER RH (w/o Power Back Door) See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service
and Repair/Overhaul/Reassembly