lexus Workshop Repair Guides

Lexus Workshop Service and Repair Manuals

Components|Page 11538 > < Components|Page 11536
Page 2
background image

(a) Install the rear seat assembly RH    See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Rear Seat Assembly (for RH

Side)/Installation.

12. INSTALL DECK SIDE TRIM BOX RH (for Compact Spare Tire)   See: Body and Frame/Interior Moulding / Trim/Headliner/Service and

Repair/Removal and Replacement/Installation

13. INSTALL DECK SIDE TRIM BOX RH (for Full Size Spare Tire)   See: Body and Frame/Interior Moulding / Trim/Headliner/Service and

Repair/Removal and Replacement/Installation

14. INSTALL NO. 3 REAR FLOOR BOARD (for Compact Spare Tire)   See: Body and Frame/Interior Moulding / Trim/Headliner/Service and

Repair/Removal and Replacement/Installation

15. INSTALL NO. 3 REAR FLOOR BOARD (for Full Size Spare Tire)   See: Body and Frame/Interior Moulding / Trim/Headliner/Service and

Repair/Removal and Replacement/Installation

16. INSTALL SPARE WHEEL COVER ASSEMBLY (for Compact Spare Tire)   See: Body and Frame/Interior Moulding / Trim/Headliner/Service

and Repair/Removal and Replacement/Installation

17. INSTALL DECK BOARD SUB-ASSEMBLY   See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal and

Replacement/Installation

18. INSTALL TONNEAU COVER ASSEMBLY   See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal and

Replacement/Installation

19. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (w/ Air Suspension)

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected  
  See: Testing and
Inspection/Programming and Relearning/Repair Instruction - Initialization.

20. INSPECT SUSPENSION CONTROL SYSTEM (w/ Air Suspension)

(a) Inspect the suspension control system    See: Steering and Suspension/Suspension/Testing and Inspection/Component Tests and General

Diagnostics/Air Suspension System/Test Mode Procedure.

From 08/2009

POWER OUTLETS (EXT): TOWING CONVERTER RELAY: INSTALLATION

1. INSTALL TOWING CONVERTER RELAY

(a) Install the towing converter relay with the bolt.

(b) Connect the connector.

2. INSTALL DECK TRIM SIDE PANEL ASSEMBLY RH   See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal

and Replacement/Installation

3. INSTALL HEIGHT CONTROL SWITCH (w/ Air Suspension)   See: Sensors and Switches/Sensors and Switches - Steering and

Suspension/Sensors and Switches - Suspension/Suspension Mode Switch/Service and Repair/Height Control Switch (for Luggage
Compartment)/Installation

4. INSTALL RECLINING REMOTE CONTROL BEZEL RH

HINT
Use the same procedure for the RH side and the LH side  
  See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal and Replacement/Installation.

Components|Page 11538 > < Components|Page 11536