RX 350 FWD V6-3.5L (2GR-FE) (2010)
5. INSTALL ROPE HOOK ASSEMBLY RH
HINT
Use the same procedure for the RH side and the LH side See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal and Replacement/Installation.
6. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK RH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal and Replacement/Installation
7. INSTALL REAR SEAT SIDE COVER RH
HINT
Use the same procedure for the RH side and the LH side See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal and Replacement/Installation.
8. INSTALL REAR FLOOR FINISH SIDE PLATE RH
HINT
Use the same procedure for the RH side and the LH side See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal and Replacement/Installation.
9. INSTALL REAR FLOOR FINISH PLATE See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Installation
10. INSTALL REAR DOOR SCUFF PLATE RH
HINT
Use the same procedure for the RH side and the LH side See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal and Replacement/Installation.
11. INSTALL REAR SEAT ASSEMBLY RH
(a) Install the rear seat assembly RH See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Rear Seat Assembly (for RH
Side)/Installation.
12. INSTALL DECK SIDE TRIM BOX RH (for Compact Spare Tire) See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal and Replacement/Installation
13. INSTALL DECK SIDE TRIM BOX RH (for Full Size Spare Tire) See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal and Replacement/Installation
14. INSTALL NO. 3 REAR FLOOR BOARD (for Compact Spare Tire) See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal and Replacement/Installation
15. INSTALL NO. 3 REAR FLOOR BOARD (for Full Size Spare Tire) See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal and Replacement/Installation
16. INSTALL SPARE WHEEL COVER ASSEMBLY (for Compact Spare Tire) See: Body and Frame/Interior Moulding / Trim/Headliner/Service
and Repair/Removal and Replacement/Installation
17. INSTALL DECK BOARD SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Installation
18. INSTALL TONNEAU COVER ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Installation
19. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (w/ Air Suspension)
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning/Repair Instruction - Initialization.
20. INSPECT SUSPENSION CONTROL SYSTEM (w/ Air Suspension)
(a) Inspect the suspension control system See: Steering and Suspension/Suspension/Testing and Inspection/Component Tests and General