RX 350 FWD V6-3.5L (2GR-FE) (2010)
NOTICE:
Be sure to engage each connector securely.
(d) Install the driver side junction block assembly with the bolt and nut.
(e) Connect the connector (1).
NOTICE:
Be sure to engage each connector securely.
(f) Engage the 2 claws to connect the 2 connectors (2) as shown in the illustration.
NOTICE:
Be sure to engage each connector securely.
(g) Connect the 3 connectors.
NOTICE:
Be sure to engage each connector securely.
3. INSTALL INSTRUMENT PANEL SAFETY PAD ASSEMBLY
HINT
Refer to the procedure from Install Instrument Panel Safety Pad Assembly See: Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Removal and Replacement/Installation.
From 08/2009
POWER DISTRIBUTION: MAIN BODY ECU: INSTALLATION
1. INSTALL MULTIPLEX NETWORK BODY ECU
NOTICE:
*
Make sure that no foreign objects get on the connecting surfaces.
*
Do not touch the ECU connector.
(a) Insert the multiplex network body ECU up to the position it contacts the housing sidewall of the guide part as shown in the illustration.
Text in Illustration