RX 350 FWD V6-3.5L (2GR-FE) (2010)
Rear Bumper Bracket: Customer Interest
Body - Poor Rear Bumper Cover Fit
L-SB-0039-10
June 16, 2010
Rear Bumper Cover Poor Fit
Service Category
Vehicle Exterior
Section
Exterior Panels/Trim
Market
USA
Applicability
Introduction
Some 2010 model year RX 350 and RX 450h models may exhibit a condition where a gap develops at the left and/or right corners of the rear bumper
cover. This condition may occur more frequently in high ambient temperatures. An improved bumper cover and support have been developed to correct
this condition. Follow the procedure in this bulletin to install the improved bumper cover and supports.
Production Change Information
This TSIB applies to vehicles produced BEFORE the Production Change Effective VINs shown.