RX 350 FWD V6-3.5L (2GR-FE) (2010)
/Page-2939008.png)
B. Engage the 4 claws and 4 guides and install the rear bumper assembly as shown in the illustration.
C. Engage the 7 claws.
HINT
Use the same procedure for the RH side and LH side.
D. Install the screw.
Torque:
2.5 N*m (26 kgf*cm, 22 in*lbf)
Use the same procedure for the RH side and LH side.
