RX 350 FWD V6-3.5L (2GR-FE) (2010)
Front Door Exterior Handle: Overhaul
Up to 08/2009
DOOR / HATCH: FRONT DOOR: DISASSEMBLY
1. PRECAUTION (w/ Navigation System for HDD)
NOTICE:
After the engine switch is turned off, the display and navigation module display (HDD navigation system) records various types of
memory and settings. As a result, after turning the engine switch off, make sure to wait at least 60 seconds before disconnecting the
cable from the negative (-) battery terminal.
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system See: Restraint
Systems/Air Bag Systems/Service Precautions.
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning/Repair Instruction - Initialization.
3. REMOVE FRONT DOOR INSIDE HANDLE BEZEL PLUG
(a) Using a moulding remover, disengage the 3 claws and remove the front door inside handle bezel plug as shown in the illustration.
4. REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Driver
Side)
(a) Using a moulding remover, disengage the 2 clips and 5 claws as shown in the illustration.
(b) Disconnect the connector and remove the power window regulator master switch assembly with front door armrest base panel.
5. REMOVE POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Front Passenger
Side) See: Sensors and Switches/Sensors and Switches - Windows and Glass/Power Window Switch/Service and Repair/Front Passenger Side
Power Window Switch/Removal
6. REMOVE DOOR ARMREST COVER
(a) Remove the door armrest cover.
7. REMOVE COURTESY LIGHT ASSEMBLY See: Lighting and Horns/Courtesy Lamp/Service and Repair/Vehicle Interior/Door Courtesy