RX 350 FWD V6-3.5L (2GR-FE) (2010)
NOTICE:
Do not damage the door glass.
25. REMOVE FRONT DOOR WINDOW REGULATOR ASSEMBLY
(a) Disconnect the connector.
(b) Loosen the temporary bolt.
Text in Illustration
NOTICE:
Do not remove the temporary bolt. If the temporary bolt is removed, the front door window regulator may fall and cause damage.
(c) Remove the 5 bolts.
(d) Remove the front door window regulator assembly.
(e) Remove the temporary bolt from the front door window regulator assembly.
26. REMOVE FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY
(a) Using a T25 "TORX" socket wrench, remove the 3 screws and the front power window regulator motor assembly.
27. REMOVE FRONT DOOR GLASS RUN
(a) Remove the front door glass run.
28. REMOVE FRONT DOOR REAR LOWER FRAME SUB-ASSEMBLY
(a) Remove the bolt and front door rear lower frame sub-assembly as shown in the illustration.