RX 350 FWD V6-3.5L (2GR-FE) (2010)
(a) Connect the cable to the negative (-) battery terminal.
(b) Connect the power window regulator master switch assembly and move the front door glass sub-assembly so that the door glass bolts can be
seen.
(1) w/ Navigation System for HDD:
NOTICE:
After the engine switch is turned off, the display and navigation module display (HDD navigation system) records various types of
memory and settings. As a result, after turning the engine switch off, make sure to wait at least 60 seconds before disconnecting the
cable from the negative (-) battery terminal.
(c) Disconnect the cable from the negative (-) battery terminal and power window regulator master switch assembly.
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system See: Restraint
Systems/Air Bag Systems/Service Precautions.
(d) Remove the 2 bolts.
NOTICE:
After the bolts are removed, do not allow the door glass to fall.
(e) Remove the front door glass sub-assembly as indicated by the arrows in the order shown in the illustration.
NOTICE:
Do not damage the door glass.
26. REMOVE FRONT DOOR WINDOW REGULATOR ASSEMBLY
(a) Disconnect the connector.
(b) Loosen the temporary bolt.
Text in Illustration
NOTICE:
Do not remove the temporary bolt. If the temporary bolt is removed, the front door window regulator may fall and cause damage.