RX 350 FWD V6-3.5L (2GR-FE) (2010)
(a) Connect the connector.
(b) Engage the 2 clips and 5 claws, and install the power window regulator master switch assembly with front door armrest base panel.
49. INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Front Passenger
Side) See: Sensors and Switches/Sensors and Switches - Windows and Glass/Power Window Switch/Service and Repair/Front Passenger Side
Power Window Switch/Installation
50. INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG
(a) Engage the 3 claws and install the front door inside handle bezel plug.
51. INSPECT FRONT DOOR See: Adjustments
52. ADJUST FRONT DOOR See: Adjustments
53. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning/Repair Instruction - Initialization.
54. INITIALIZE POWER WINDOW CONTROL SYSTEM
See: Windows and Glass/Windows/Testing and Inspection/Programming and Relearning/Initialization
55. INSPECT SRS WARNING LIGHT
See: Restraint Systems/Air Bag Systems/Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnosis System
56. ADJUST SIDE TELEVISION CAMERA OPTICAL AXIS (CAMERA POSITION SETTING) (w/ Parking Assist Monitor System)
See: Accessories and Optional Equipment/Collision Avoidance and Parking Assist Systems/Testing and Inspection/Programming and
Relearning/Side Monitor System (w/ Parking Assist Monitor System)/Calibration
From 08/2009
DOOR / HATCH: FRONT DOOR: REASSEMBLY
1. INSTALL FRONT DOOR FRONT WINDOW FRAME MOULDING
2. INSTALL FRONT DOOR UPPER WINDOW FRAME MOULDING
3. INSTALL FRONT DOOR PANEL SUB-ASSEMBLY
4. INSTALL COWL SIDE TRIM SUB-ASSEMBLY See: Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Installation
5. INSTALL FRONT DOOR SCUFF PLATE See: Interior Moulding / Trim/Headliner/Service and Repair/Removal and Replacement/Installation