RX 350 FWD V6-3.5L (2GR-FE) (2010)
6. INSTALL FRONT DOOR REAR WINDOW FRAME MOULDING
7. INSTALL FRONT DOOR BELT MOULDING ASSEMBLY
8. INSTALL FRONT DOOR OUTSIDE MOULDING SUB-ASSEMBLY See: Exterior Moulding / Trim/Lower Side Moulding / Trim/Service and
Repair/Installation
9. INSTALL FRONT DOOR LOWER OUTSIDE MOULDING See: Exterior Moulding / Trim/Lower Side Moulding / Trim/Service and
Repair/Installation
10. INSTALL FRONT DOOR WEATHERSTRIP
(a) Engage the 19 clips and install a new front door weatherstrip.
Text in Illustration
11. INSTALL FRONT DOOR CHECK ASSEMBLY
(a) Apply MP grease to the sliding areas of the front door check assembly.
(b) Apply adhesive to the threads of the bolt.
Adhesive:
Toyota Genuine Adhesive 1324, Three Bond 1324 or equivalent
(c) Install the front door check assembly with the bolt and 2 nuts.
Bolt - Torque : 27 Nm (275 kgf-cm, 20 ft-lbf)
Nut - Torque : 8.0 Nm (82 kgf-cm, 71 in-lbf)
12. INSTALL FRONT DOOR CHECK COVER
(a) Install the front door check cover.
13. INSTALL FRONT DOOR LOCK OPEN ROD