RX 350 FWD V6-3.5L (2GR-FE) (2010)
39. REMOVE ELECTRICAL KEY WIRE HARNESS
(a) Disconnect the connector.
(b) Disengage the 5 clamps and remove the electrical key wire harness.
40. REMOVE FRONT DOOR OUTSIDE HANDLE FRAME SUB-ASSEMBLY
(a) Using a T30 "TORX" socket wrench, loosen the screw.
(b) Slide the front door outside handle frame sub-assembly to disengage the door handle nut and claw of the front door outside handle frame
sub-assembly, and then remove it.
41. REMOVE FRONT DOOR LOCK OPEN ROD
(a) Remove the front door lock open rod as indicated by the arrows, in the order shown in the illustration.
42. REMOVE FRONT DOOR CHECK COVER
(a) Remove the front door check cover.
43. REMOVE FRONT DOOR CHECK ASSEMBLY
(a) Remove the bolt, 2 nuts and front door check assembly.