RX 350 FWD V6-3.5L (2GR-FE) (2010)
ornaments.
(e) Cut off the adhesive by pulling the piano wire around the front side fix window assembly.
NOTICE:
Leave as much adhesive on the vehicle body as possible when cutting through the adhesive.
(f) Disengage the 3 clips.
(g) Using suction cups, remove the glass.
NOTICE:
Be careful not to drop the glass.
4. CLEAN VEHICLE BODY
(a) Clean and shape the contact surfaces of the vehicle body.
Text in Illustration
(1) Using a knife, cut away excess adhesive on the contact surfaces of the vehicle body as shown in the illustration.
NOTICE:
Be careful not to damage the vehicle body.
HINT
Leave as much adhesive on the vehicle body as possible.
(b) Clean the contact surfaces of the vehicle body with a piece of cloth saturated with cleaner.
HINT
Even if all the adhesive has been removed, clean the vehicle body.