RX 350 FWD V6-3.5L (2GR-FE) (2010)
NOTICE:
Do not remove the temporary bolt. If the temporary bolt is removed, the rear door window regulator may fall and cause damage.
(b) Remove the 5 bolts.
(c) Remove the rear door window regulator assembly.
(d) Remove the temporary bolt from the rear door window regulator assembly.
23. REMOVE REAR POWER WINDOW REGULATOR MOTOR ASSEMBLY
(a) Using a T25 "TORX" socket wrench, remove the 3 screws and the rear power window regulator motor assembly.
24. REMOVE REAR DOOR LOCK ASSEMBLY
(a) Using a T30 "TORX" socket wrench, remove the 3 screws.
(b) Move the rear door lock assembly downward and pull the release plate out of the rear door outside handle frame.
(c) Remove the door lock wiring harness seal from the rear door lock assembly.
25. REMOVE REAR DOOR LOCK REMOTE CONTROL CABLE ASSEMBLY
(a) Using a screwdriver, disengage the claw.