RX 350 FWD V6-3.5L (2GR-FE) (2010)
(2) Clean the No. 2 access panel weatherstrip.
(3) Remove the double-sided tape from the No. 2 access panel weatherstrip.
(4) Wipe off any tape adhesive residue with cleaner.
(5) Apply new double-sided tape to the No. 2 access panel weatherstrip as shown in the illustration.
Text in Illustration
(e) Engage the 5 clips to install the No. 2 access panel weatherstrip.
Text in Illustration
7. INSTALL REAR DOOR PANEL PROTECTOR
HINT
When installing the rear door panel protector, heat the vehicle body and rear door panel protector using a heat light.
Heating Temperature
NOTICE:
Do not heat the vehicle body or rear door panel protector excessively.