RX 350 FWD V6-3.5L (2GR-FE) (2010)
(c) Remove the rear door outside handle assembly as shown in the illustration.
29. REMOVE REAR DOOR FRONT OUTSIDE HANDLE PAD
(a) Disengage the 3 claws and remove the rear door front outside handle pad.
30. REMOVE REAR DOOR REAR OUTSIDE HANDLE PAD
(a) Disengage the 2 claws and remove the rear door rear outside handle pad.
31. REMOVE REAR DOOR OUTSIDE HANDLE FRAME SUB-ASSEMBLY
(a) Using a T30 "TORX" socket wrench, loosen the screw.
(b) Slide the rear door outside handle frame sub-assembly to disengage the door handle nut and claw of the rear door outside handle frame
sub-assembly, and then remove it.
32. REMOVE REAR DOOR LOWER OUTSIDE MOULDING See: Exterior Moulding / Trim/Lower Side Moulding / Trim/Service and
Repair/Removal
33. REMOVE REAR DOOR PANEL PROTECTOR
HINT
When removing the rear door panel protector, heat the vehicle body and rear door panel protector using a heat light.
Heating Temperature