RX 350 FWD V6-3.5L (2GR-FE) (2010)
(f) Connect the 3 connectors.
9. INSPECT FOR LEAK AND REPAIR
(a) After the adhesive has hardened, apply water from the outside of the vehicle. Check that no water leaks into the cabin.
(b) If water leaks into the cabin, allow the water to dry and add adhesive.
(c) Remove the protective tape.
10. INSTALL REAR WIPER ARM AND BLADE ASSEMBLY See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Rear Wiper
Motor/Installation
11. INSTALL REAR SPOILER SUB-ASSEMBLY See: Spoilers, Flaps, and Air Dams/Spoiler/Service and Repair/Installation
12. INSTALL BACK DOOR TRIM COVER LH See: Service and Repair/Overhaul/Reassembly
13. INSTALL BACK DOOR TRIM COVER RH See: Service and Repair/Overhaul/Reassembly
14. INSTALL BACK DOOR TRIM PANEL ASSEMBLY See: Service and Repair/Overhaul/Reassembly
15. INSTALL BACK DOOR SERVICE HOLE COVER LH See: Service and Repair/Overhaul/Reassembly
16. INSTALL BACK DOOR SERVICE HOLE COVER RH See: Service and Repair/Overhaul/Reassembly
17. INSTALL BACK DOOR UPPER TRIM COVER LH See: Service and Repair/Overhaul/Reassembly
18. INSTALL BACK DOOR UPPER TRIM COVER RH See: Service and Repair/Overhaul/Reassembly
19. INSTALL NO. 2 ROOM LIGHT ASSEMBLY See: Lighting and Horns/Trunk Lamp/Service and Repair/Installation
20. INSTALL BACK DOOR LOCK COVER See: Service and Repair/Overhaul/Reassembly
21. INSTALL BACK DOOR FINISH COVER LH (w/o Power Back Door) See: Service and Repair/Overhaul/Reassembly
22. INSTALL BACK DOOR TRIM BASE (w/ Power Back Door) See: Service and Repair/Overhaul/Reassembly
23. INSTALL BACK DOOR FINISH COVER RH (w/o Power Back Door) See: Service and Repair/Overhaul/Reassembly
24. INSTALL DOOR PULL HANDLE WITH SWITCH See: Service and Repair/Overhaul/Reassembly
25. INSTALL TONNEAU COVER SUB-ASSEMBLY
26. INSTALL UPPER BACK WINDOW PANEL TRIM See: Service and Repair/Overhaul/Reassembly