RX 350 FWD V6-3.5L (2GR-FE) (2010)
Trunk / Liftgate Shock / Support: Procedures
DOOR / HATCH: BACK DOOR SUPPORT: DISPOSAL
1. DISPOSE OF BACK DOOR STAY ASSEMBLY
(a) Secure the back door stay assembly horizontally in a vise with the piston rod pulled out.
(b) Wear safety glasses. Use a metal saw to slowly cut a groove between A and B shown in the illustration to release the gas.
NOTICE:
Although the gas inside the back door stay assembly is colorless, odorless and harmless, metal debris may scatter. Therefore, cover the
back door stay assembly with a piece of cloth or other material.