RX 350 FWD V6-3.5L (2GR-FE) (2010)
Text in Illustration
(b) Release the ball joint and remove the back door stay assembly.
NOTICE:
Remove the back door stay assembly while supporting the back door by hand.
6. REMOVE BACK DOOR LOWER STAY BRACKET
(a) Remove the 2 bolts and back door lower stay bracket.
7. REMOVE BACK DOOR UPPER DAMPER STAY BRACKET
(a) Remove the 2 bolts and back door upper damper stay bracket.
From 08/2009
DOOR / HATCH: BACK DOOR SUPPORT: REMOVAL
1. REMOVE REAR COMBINATION LIGHT ASSEMBLY
HINT
Refer to the procedure up to Remove Rear Combination Light Assembly See: Lighting and Horns/Backup Lamp/Service and
Repair/Removal and Replacement/Removal
2. REMOVE BACK DOOR STOPPER CUSHION
(a) Remove the screw and back door stopper cushion.
3. REMOVE QUARTER PANEL PLUG
(a) Using a moulding remover, disengage the 2 claws and remove the quarter panel plug as shown in the illustration.