RX 350 FWD V6-3.5L (2GR-FE) (2010)
Heating Temperature
NOTICE:
Do not heat the vehicle body or rear door panel protector excessively.
(a) Using a heat light, heat the vehicle body surface.
(b) Remove the double-sided tape from the vehicle body.
(c) Wipe off any tape adhesive residue with cleaner.
(d) If reusing the back door stopper cushion cover.
(1) Using a heat light, heat the back door stopper cushion cover.
(2) Clean the back door stopper cushion cover.
(3) Remove the double-sided tape from the back door stopper cushion cover.
(4) Wipe off any tape adhesive residue with cleaner.
(5) Apply new double-sided tape to the back door stopper cushion cover as shown in the illustration.
(e) Engage the 4 clips and install the back door stopper cushion cover.