RX 350 FWD V6-3.5L (2GR-FE) (2010)
(3) Wipe off any tape adhesive residue with cleaner.
(4) Apply new double-sided tape to the No. 3 back door name plate.
(c) Install the No. 3 back door name plate.
(1) Using a heat light, heat the vehicle body and the No. 3 back door name plate.
(2) Remove the release paper from the No. 3 back door name plate.
HINT
After removing the release paper, keep the exposed adhesive free from foreign matter.
(3) Install the No. 3 back door name plate as shown in the illustration.
Standard Measurement