RX 350 FWD V6-3.5L (2GR-FE) (2010)
6. INSTALL FRONT SUSPENSION MEMBER DYNAMIC DAMPER (for 2WD)
(a) Install the front suspension member dynamic damper with the 2 bolts.
Torque : 29 Nm (296 kgf-cm, 21 ft-lbf)
7. INSTALL FRONT SUSPENSION MEMBER DYNAMIC DAMPER (for AWD)
(a) Install the front suspension member dynamic damper with the 2 bolts.
Torque : 29 Nm (296 kgf-cm, 21 ft-lbf)
8. INSTALL FRONT LOWER SUSPENSION ARM LH See: Steering and Suspension/Suspension/Control Arm/Service and Repair/Front Lower
Suspension Arm/Installation
9. INSTALL FRONT LOWER SUSPENSION ARM RH
HINT
Perform the same procedure as the LH side.
10. INSTALL REAR ENGINE MOUNTING INSULATOR ASSEMBLY See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal
and Replacement/Engine Assembly/Installation
11. INSTALL ENGINE MOUNTING INSULATOR RH See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine Assembly/Installation
12. INSTALL ENGINE MOUNTING INSULATOR LH See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine Assembly/Installation
13. INSTALL FRONT ENGINE MOUNTING INSULATOR See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine Assembly/Installation
14. INSTALL FRONT FRAME ASSEMBLY See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine
Assembly/Installation
15. INSTALL STEERING LINK ASSEMBLY See: Steering and Suspension/Steering/Steering Gear/Service and Repair/Removal and
Replacement/Installation
16. INSTALL FRONT STABILIZER BAR WITH FRONT STABILIZER LINK ASSEMBLY
17. INSTALL NO. 1 FRONT STABILIZER BRACKET LH See: Steering and Suspension/Suspension/Stabilizer Bar/Service and Repair/Front
Stabilizer Bar/Installation
18. INSTALL NO. 1 FRONT STABILIZER BRACKET RH
HINT
Perform the same procedure as the LH side.
19. INSTALL ENGINE ASSEMBLY WITH TRANSAXLE
HINT
Refer to the procedure from Install Engine Assembly with Transaxle See: Engine, Cooling and Exhaust/Engine/Service and