RX 350 FWD V6-3.5L (2GR-FE) (2010)
member sub-assembly.
Text in Illustration
SST : 09830-10010
09830-01010
09830-01040
09830-01050
SST : 09950-40011
09951-04020
09952-04010
09954-04010
09955-04051
09958-04011
NOTICE:
*
Set the claws of SST onto the rear suspension member sub-assembly securely as shown in the illustration.
*
Be careful as the rear suspension member front body mounting cushion may fly out.
*
The rear suspension member front body mounting cushion cannot be reused.
(d) Remove SST and the rear suspension member front body mounting cushion (LH Side) from the rear suspension member sub-assembly.
25. REMOVE REAR SUSPENSION MEMBER FRONT BODY MOUNTING CUSHION (for RH Side)
HINT
Perform the same procedure as the LH side.
26. REMOVE REAR SUSPENSION MEMBER REAR BODY MOUNT CUSHION LH
(a) Using a chisel and hammer, bend the 2 portions of the rear suspension member rear body mounting cushion LH rib.
Text in Illustration
NOTICE:
Make sure to bend the 2 portions of the cushion rib until the claws of SST can fit securely.