RX 350 FWD V6-3.5L (2GR-FE) (2010)
Console Lamp: Testing and Inspection
Personal Light
LIGHTING (INT): PERSONAL LIGHT: INSPECTION
1. INSPECT MAP LIGHT ASSEMBLY
(a) Inspect the interior lights.
(1) Connect a positive (+) lead from the battery to terminal 9 (+B1) and a negative (-) lead to terminal 12 (CTY).
(2) Check that the interior lights come on.
OK:
Interior lights come on.
Text in Illustration
(2) If the result is not as specified, replace the map light assembly.
(b) Inspect the interior light door switch and on/off switch.
(1) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
(1) If the result is not as specified, replace the map light assembly.
(c) Inspect the personal lights.
(1) Connect a positive (+) lead from the battery to terminal 9 (+B1) and a negative (-) lead to terminal 40 (GND).
(2) Check that the personal lights come on.
OK:
(2) If the result is not as specified, replace the bulb or map light assembly.