RX 350 FWD V6-3.5L (2GR-FE) (2010)
(d) Remove the clip [A].
(e) Protect the curtain shield airbag assembly.
Text in Illustration
(1) Cover the airbag with a cloth or piece of nylon and secure the ends of the cover with tape, as shown in the illustration.
Protective Cover size:
X
700 mm (2.30 ft.)
Y
120 mm (4.72 in.)
NOTICE:
Cover the curtain shield airbag with a protective cover as soon as the front pillar garnish is removed.
7. REMOVE REAR DOOR SCUFF PLATE LH
(a) Disengage the 6 claws, 3 clips and guide, and remove the rear door scuff plate LH.
8. REMOVE LOWER CENTER PILLAR GARNISH LH
(a) Disengage the 2 claws and 5 clips, and remove the lower center pillar garnish LH.
9. DISCONNECT FRONT SEAT OUTER BELT ASSEMBLY LH See: Restraint Systems/Seat Belt Systems/Seat Belt/Service and