RX 350 FWD V6-3.5L (2GR-FE) (2010)
32. REMOVE REAR FLOOR FINISH PLATE
(a) Disengage the 2 claws, 6 clips and 2 guides, and remove the rear floor finish plate.
33. REMOVE REAR FLOOR FINISH SIDE PLATE LH
(a) Remove the clip.
(b) Disengage the claw and 2 clips.
(c) Disengage the guide and remove the rear floor finish side plate LH.
34. REMOVE REAR SEAT ASSEMBLY LH
(a) Remove the rear seat assembly LH See: Seats/Service and Repair/Removal and Replacement/Rear Seat Assembly (for LH Side)/Removal.
35. REMOVE REAR SEAT SIDE COVER LH
(a) Remove the 2 clips.
(b) Disengage the 2 claws and 3 clips, and remove the rear seat side cover LH.
HINT
A part of the clip remains on the vehicle side.
36. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK (for LH Side)
(a) Remove the No. 1 luggage compartment trim hook as shown in the illustration.