RX 350 FWD V6-3.5L (2GR-FE) (2010)
(c) Engage the 3 fasteners as shown in the illustration.
53. INSTALL CENTER PILLAR GARNISH LH
(a) Pass the floor anchor of the front seat outer seat belt assembly LH through the center pillar garnish LH.
(b) Engage the clip to install the center pillar garnish LH with the 2 screws.
54. CONNECT FRONT SEAT OUTER BELT ASSEMBLY LH See: Restraint Systems/Seat Belt Systems/Seat Belt/Service and Repair/Removal
and Replacement/Front Seat Outer Belt Assembly/Installation
55. INSTALL LOWER CENTER PILLAR GARNISH LH
(a) Engage the 2 claws and the 5 clips to install the lower center pillar garnish LH.
56. INSTALL REAR DOOR SCUFF PLATE LH
(a) Engage the 3 clips, guide and 6 claws, and install the rear door scuff plate LH.
57. INSTALL FRONT PILLAR GARNISH LH
(a) Remove the protective cover.
Text in Illustration