RX 350 FWD V6-3.5L (2GR-FE) (2010)
61. INSTALL CENTER PILLAR GARNISH RH
HINT
Use the same procedure for the RH side and the LH side.
62. CONNECT FRONT SEAT OUTER BELT ASSEMBLY RH
HINT
Use the same procedure for the RH side and the LH side.
63. INSTALL LOWER CENTER PILLAR GARNISH RH
HINT
Use the same procedure for the RH side and the LH side.
64. INSTALL REAR DOOR SCUFF PLATE RH
HINT
Use the same procedure for the RH side and the LH side.
65. INSTALL FRONT PILLAR GARNISH RH
HINT
Use the same procedure for the RH side and the LH side.
66. INSTALL INSTRUMENT SIDE PANEL RH
HINT
Use the same procedure for the RH side and the LH side.
67. INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH
HINT
Use the same procedure for the RH side and the LH side.
68. INSTALL FRONT DOOR SCUFF PLATE RH
HINT
Use the same procedure for the RH side and the LH side.
69. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (w/ Air Suspension)
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning/Repair Instruction - Initialization.
70. INSPECT SUSPENSION CONTROL SYSTEM (w/ Air Suspension)
(a) Inspect the suspension control system See: Steering and Suspension/Suspension/Testing and Inspection/Component Tests and General
Diagnostics/Air Suspension System/Test Mode Procedure.
From 08/2009
INTERIOR PANELS / TRIM: ROOF HEADLINING: INSTALLATION
1. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH