RX 350 FWD V6-3.5L (2GR-FE) (2010)
Text in Illustration
NOTICE:
After installation, make sure that the back door weatherstrip does not interfere with the roof headlining assembly.
(h) Connect the No. 1 roof wire connector to the inner rear view mirror.
(i) w/ Rain Sensor:
(1) Connect the No. 1 roof wire connector to the rain sensor.
(j) Connect the No. 2 antenna cord sub-assembly connectors and washer hose, and engage the 2 claws and 3 clamps to the rear pillar RH.
7. INSTALL VISOR HOLDER (for LH Side)
(a) Engage the 2 claws.