RX 350 FWD V6-3.5L (2GR-FE) (2010)
Text in Illustration
(d) Apply adhesive tape to the locations shown in the illustration.
Text in Illustration
HINT
As shown in the illustration, line up and secure the reference tape of the wire harness to the tip of the roof headlining assembly.
31. INSTALL REAR NO. 3 WASHER HOSE
HINT
The double-sided tape is not available as supply parts. If the tape still has enough adhesion to secure the roof headlining and rear No.
3 washer hose, reuse the tape. If the roof headlining has been replaced with a new one, or if the tape and/or the double-sided tape is no
longer sticky, apply new tape following the procedure below.
(a) Apply new double-sided tape.
(1) Remove the double-sided tape from the roof headlining assembly.