RX 350 FWD V6-3.5L (2GR-FE) (2010)
Antenna - Keyless Entry: Service and Repair
Electrical Key Oscillator (for Rear Side)
Components
THEFT DETERRENT / KEYLESS ENTRY: ELECTRICAL KEY OSCILLATOR (for Rear Side): COMPONENTS
Up to 08/2009
THEFT DETERRENT / KEYLESS ENTRY: ELECTRICAL KEY OSCILLATOR (for Rear Side): REMOVAL
1. REMOVE NO. 2 LUGGAGE COMPARTMENT SIDE COVER PROTECTOR See: Bumper/Rear Bumper/Service and Repair/Removal and
Replacement/Removal
2. REMOVE NO. 1 LUGGAGE COMPARTMENT SIDE COVER PROTECTOR See: Steering and Suspension/Suspension/Suspension Control (
Automatic - Electronic )/Compressor/Pump/Service and Repair/Removal
3. REMOVE REAR BUMPER ASSEMBLY See: Bumper/Rear Bumper/Service and Repair/Removal and Replacement/Removal
4. REMOVE REAR BUMPER ENERGY ABSORBER See: Bumper/Rear Bumper/Service and Repair/Overhaul/Disassembly
5. REMOVE ELECTRICAL KEY OSCILLATOR (ELECTRICAL KEY ANTENNA)
(a) Disconnect the connector.
(b) Remove the 2 nuts and electrical key oscillator (electrical key antenna).
NOTICE:
Be careful when removing the electrical key oscillator (electrical key antenna). If the oscillator is dropped, replace it with a new one.
From 08/2009