RX 350 FWD V6-3.5L (2GR-FE) (2010)
Keyless Entry Module: Service and Repair
Installation
Up to 08/2009
DOOR LOCK: DOOR CONTROL RECEIVER: INSTALLATION
1. INSTALL DOOR CONTROL RECEIVER
(a) Install the door control receiver with the bolt.
(b) Connect the connector.
2. INSTALL DECK TRIM SIDE PANEL ASSEMBLY RH See: Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Removal
3. INSTALL HEIGHT CONTROL SWITCH (w/ Air Suspension) See: Sensors and Switches/Sensors and Switches - Steering and
Suspension/Sensors and Switches - Suspension/Suspension Mode Switch/Service and Repair/Height Control Switch (for Luggage
Compartment)/Installation
4. INSTALL RECLINING REMOTE CONTROL BEZEL RH
HINT
Use the same procedure for the RH side and LH side See: Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Installation.
5. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK
HINT
Use the same procedure for the RH side and LH side See: Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Installation.
6. INSTALL ROPE HOOK ASSEMBLY
HINT
Use the same procedure for the RH side and LH side See: Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Installation.
7. INSTALL REAR SEAT SIDE COVER RH
HINT
Use the same procedure for the RH side and LH side See: Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Installation.
8. INSTALL REAR DOOR SCUFF PLATE RH
HINT
Use the same procedure for the RH side and LH side See: Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Installation.
9. INSTALL REAR FLOOR FINISH SIDE PLATE RH
HINT
Use the same procedure for the RH side and LH side See: Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Installation.
10. INSTALL REAR FLOOR FINISH PLATE See: Interior Moulding / Trim/Headliner/Service and Repair/Removal and Replacement/Installation