lexus Workshop Repair Guides

Lexus Workshop Service and Repair Manuals

Keyless Start Transmitter > < Components|Page 12628
Page 2
background image

From 08/2009

THEFT DETERRENT / KEYLESS ENTRY: REMOTE ENGINE STARTER ECU: INSTALLATION

1. INSTALL REMOTE ENGINE STARTER ECU

(a) Install the remote engine starter ECU with the 2 bolts.

(b) Connect the connector.

2. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY   See: Interior Moulding / Trim/Dashboard / Instrument Panel/Service and

Repair/Removal and Replacement/Installation

3. INSTALL PASSENGER SIDE KNEE AIRBAG ASSEMBLY   See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Removal

and Replacement/Knee Airbag Assembly (for Front Passenger Side)/Installation

4. INSTALL INSTRUMENT PANEL GARNISH RH   See: Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Removal

and Replacement/Installation

5. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY   See: Interior Moulding / Trim/Dashboard / Instrument

Panel/Service and Repair/Removal and Replacement/Installation

6. INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH

HINT
Use the same procedure for the RH side and LH side  
  See: Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Installation.

7. INSTALL FRONT DOOR SCUFF PLATE RH

HINT
Use the same procedure for the RH side and LH side  
  See: Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Installation.

8. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL   See: Interior Moulding / Trim/Dashboard / Instrument Panel/Service and

Repair/Removal and Replacement/Installation

9. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY   See: Interior Moulding / Trim/Dashboard / Instrument Panel/Service and

Repair/Removal and Replacement/Installation

10. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY   See: Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Removal

and Replacement/Installation

11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected  
  See: Testing and
Inspection/Programming and Relearning/Repair Instruction - Initialization.

12. INSPECT SRS WARNING LIGHT

   See: Restraint Systems/Air Bag Systems/Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnosis System

Keyless Start Transmitter > < Components|Page 12628