RX 350 FWD V6-3.5L (2GR-FE) (2010)
2. INSTALL SEAT HEATER SWITCH ASSEMBLY
(a) Engage the clamp.
(b) Engage the 3 claws and 3 clips.
(c) Engage the 4 claws as shown in the illustration.
(d) Connect each connector.
(e) Engage the 4 claws and 4 clips to install the upper console panel sub-assembly.
3. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY See: Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Removal
and Replacement/Installation