RX 350 FWD V6-3.5L (2GR-FE) (2010)
Required Tools & Equipment
Repair Procedure
1. While sitting in the seat confirm the condition by leaning against the seat back. If the seat feels slightly loose this TSIB may apply. If not follow the
Repair Manual for additional diagnostics.
2. Remove the front and rear seat track covers.
3. Follow Repair Manual instructions to remove the affected seat assembly from the vehicle. Refer to the Technical Information System (TIS)
2010 RX 350 Repair Manual:
Vehicle Interior - Seat - "Seat Front Seat Assembly: Removal (to 08/2009) / (from 08/2009)"
4. Locate the two 12 mm front rail end cap nuts.