RX 350 FWD V6-3.5L (2GR-FE) (2010)
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait for 90 seconds after disconnecting the terminal to prevent the airbag from deploying See: Restraint Systems/Air Bag
Systems/Service Precautions.
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning/Repair Instruction - Initialization.
3. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY See: Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Removal
and Replacement/Removal
4. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY See: Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Removal and Replacement/Removal
5. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL See: Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Removal and Replacement/Removal
6. REMOVE FRONT DOOR SCUFF PLATE RH See: Interior Moulding / Trim/Headliner/Service and Repair/Removal and Replacement/Removal
7. REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH See: Interior Moulding / Trim/Headliner/Service and Repair/Removal and
Replacement/Removal
8. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY See: Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Removal and Replacement/Removal
9. REMOVE INSTRUMENT PANEL GARNISH RH See: Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Removal
and Replacement/Removal
10. REMOVE FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY See: Restraint Systems/Air Bag Systems/Air Bag/Service and
Repair/Removal and Replacement/Knee Airbag Assembly (for Front Passenger Side)/Removal
11. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY See: Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Removal and Replacement/Removal
12. REMOVE POWER BACK DOOR MAIN SWITCH
(a) Disengage the 2 claws and remove the power back door main switch as shown in the illustration.
From 08/2009
DOOR / HATCH: POWER BACK DOOR MAIN SWITCH: REMOVAL
1. PRECAUTION (w/ Navigation System for HDD)
NOTICE:
After the engine switch is turned off, the display and navigation module display (HDD navigation system) records various types of
memory and settings. As a result, after turning the engine switch off, make sure to wait at least 60 seconds before disconnecting the
cable from the negative (-) battery terminal.
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait for 90 seconds after disconnecting the terminal to prevent the airbag from deploying See: Restraint Systems/Air Bag
Systems/Service Precautions.
NOTICE: