RX 350 FWD V6-3.5L (2GR-FE) (2010)
/Page-1729002.png)
HINT
Use the same procedure for the RH side and LH side.
(b) Remove the 5 clips and 3 screws, and turn back the front fender liner.
(c) Disconnect the front speed sensor connector and remove the 2 clamps.
(d) Remove the bolt and No. 2 sensor clamp from the body.
Text in Illustration
(e) Remove the bolt, No. 1 sensor clamp and front brake flexible hose together from the shock absorber assembly.
Text in Illustration
