RX 350 FWD V6-3.5L (2GR-FE) (2010)
(c) Remove the parking brake cable support bracket, 2 cable support brackets and No. 2 cable support bracket from the No. 2 parking brake cable
assembly.
Text in Illustration
From 08/2009
PARKING BRAKE: PARKING BRAKE CABLE: REMOVAL
1. PRECAUTION (w/ Navigation System for HDD)
NOTICE:
After the engine switch is turned off, the display and navigation module display (HDD navigation system) records various types of
memory and settings. As a result, after turning the engine switch off, make sure to wait at least 60 seconds before disconnecting the
cable from the negative (-) battery terminal.
2. PRECAUTION (w/ Air Suspension)
NOTICE:
Be sure to read Precaution thoroughly before servicing See: Steering and Suspension/Suspension/Service Precautions/Suspension
Control System.
3. REMOVE PARKING BRAKE CONTROL PEDAL ASSEMBLY
HINT
Refer to the instructions for Removal of the parking brake pedal See: Parking Brake Pedal/Service and Repair/Removal and
Replacement/Removal.
4. REMOVE NO. 1 PARKING BRAKE CABLE ASSEMBLY
(a) Remove the adjusting nut.