RX 350 FWD V6-3.5L (2GR-FE) (2010)
Bolt (A) - Torque : 8.5 Nm (87 kgf-cm, 75 in-lbf)
Bolt (B) - Torque : 6.0 Nm (61 kgf-cm, 53 in-lbf)
Bolt (C) - Torque : 19 Nm (192 kgf-cm, 14 ft-lbf)
Nut - Torque : 6.0 Nm (61 kgf-cm, 53 in-lbf)
(c) Install the No. 3 parking brake cable assembly to the backing plate with the 2 bolts.
Torque : 8.0 Nm (82 kgf-cm, 71 in-lbf)
5. INSTALL NO. 2 PARKING BRAKE SHOE ASSEMBLY WITH PARKING BRAKE SHOE LEVER
HINT
Refer to the procedures from "Install No. 2 Parking Brake Shoe Assembly with Parking Brake Shoe Lever" See: Service and
Repair/Overhaul/Reassembly.
6. INSPECT BRAKE WARNING LIGHT See: Adjustments
From 08/2009
PARKING BRAKE: PARKING BRAKE CABLE: INSTALLATION
1. INSTALL NO. 1 PARKING BRAKE CABLE ASSEMBLY
(a) Pass the No. 1 parking brake cable assembly through the parking brake pedal.
(b) Bend the parking brake pedal claw.
(c) Install the clip to the No. 1 parking brake cable assembly.