RX 350 FWD V6-3.5L (2GR-FE) (2010)
(b) Disengage the 4 clips to remove the center front floor cover.
13. REMOVE REAR ENGINE SERVICE COVER ASSEMBLY
(a) Remove the 2 bolts and rear engine service cover assembly.
14. SEPARATE NO. 3 PARKING BRAKE CABLE ASSEMBLY
(a) Separate the No. 3 parking brake cable assembly from the parking brake equalizer.
15. SEPARATE NO. 2 PARKING BRAKE CABLE ASSEMBLY
HINT
Perform the same procedure as for the No. 3 parking brake cable assembly.
16. REMOVE PARKING BRAKE EQUALIZER
(a) Slide the rubber boot as shown in the illustration.
(b) Remove the parking brake equalizer from the No. 1 parking brake cable assembly as shown in the illustration.