RX 350 FWD V6-3.5L (2GR-FE) (2010)
Torque : 13 Nm (130 kgf-cm, 9 ft-lbf)
NOTICE:
Be careful not to damage the brake lines or clamps. If any parts are damaged, replace them with new ones.
4. CONNECT BRAKE MASTER CYLINDER PUSH ROD CLEVIS See: Brake Pedal Assy/Service and Repair/Removal and
Replacement/Installation
5. INSTALL BRAKE PEDAL RETURN SPRING See: Brake Pedal Assy/Service and Repair/Removal and Replacement/Installation
6. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard /
Instrument Panel/Service and Repair/Removal and Replacement/Installation
7. INSTALL NO. 1 FRONT BRAKE TUBE ASSEMBLY
(a) Engage the 3 clamps to install the No. 1 front brake tube assembly.
NOTICE:
Be careful not to damage the brake lines or clamps. If any parts are damaged, replace them with new ones.
8. INSTALL NO. 5 FRONT BRAKE TUBE
(a) Engage the clamp to install the No. 5 front brake tube.
(b) Using a union nut wrench, connect the No. 5 front brake tube.
Torque : 15 Nm (155 kgf-cm, 11 ft-lbf)
NOTICE:
Use the formula to calculate special torque values for situations where the union nut wrench is combined with a torque wrench See:
Service Precautions.
(c) Engage the grommet of the No. 5 front brake tube.
(d) Using a union nut wrench, connect the No. 5 front brake tube to the front brake flexible hose LH.