RX 350 FWD V6-3.5L (2GR-FE) (2010)
/Page-1825003.png)
Repair/Removal and Replacement/Removal
15. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Removal and Replacement/Removal
16. REMOVE CONSOLE BOX See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Removal and
Replacement/Removal
17. REMOVE YAW RATE AND ACCELERATION SENSOR
(a) Disconnect the connector from the yaw rate and acceleration sensor.
(b) Remove the 2 bolts and yaw rate and acceleration sensor.
NOTICE:
Do not remove the installation nuts.
