RX 350 FWD V6-3.5L (2GR-FE) (2010)
Cruise Control Module: Service and Repair
Removal
Up to 08/2009
CRUISE CONTROL: DRIVING SUPPORT ECU: REMOVAL
1. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard /
Instrument Panel/Service and Repair/Removal and Replacement/Removal
2. REMOVE DRIVING SUPPORT ECU
(a) Disconnect the connector.
(b) Disengage the clamp.
(c) Remove the nut and the driving support ECU.
From 08/2009
CRUISE CONTROL: DRIVING SUPPORT ECU: REMOVAL
1. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard /
Instrument Panel/Service and Repair/Removal and Replacement/Removal
2. REMOVE DRIVING SUPPORT ECU
(a) Disconnect the connector.
(b) Disengage the clamp.
(c) Remove the nut and the driving support ECU.