RX 350 FWD V6-3.5L (2GR-FE) (2010)
Radiator: Service and Repair
Removal
Up to 08/2009
2GR-FE COOLING: RADIATOR: REMOVAL
1. PRECAUTION (w/ Air Suspension)
CAUTION:
Be sure to read Precaution thoroughly before service See: Steering and Suspension/Suspension/Service Precautions/Suspension
Control System.
2. PRECAUTION (w/ Navigation System)
NOTICE:
After the engine switch is turned off, the display and navigation module display (HDD navigation system) records various types of
memory and settings. As a result, after turning the engine switch off, make sure to wait at least 60 seconds before disconnecting the
cable from the negative (-) battery terminal See: Engine/Service and Repair/Removal and Replacement/Engine Assembly/Removal.
3. REMOVE ENGINE ROOM SIDE COVER LH See: Body and Frame/Bumper/Front Bumper/Service and Repair/Removal and
Replacement/Removal
4. REMOVE ENGINE ROOM SIDE COVER See: Body and Frame/Bumper/Front Bumper/Service and Repair/Removal and
Replacement/Removal
5. REMOVE COOL AIR INTAKE DUCT SEAL See: Body and Frame/Bumper/Front Bumper/Service and Repair/Removal and
Replacement/Removal
6. REMOVE NO. 1 ENGINE UNDER COVER
7. DRAIN ENGINE COOLANT See: Coolant/Service and Repair
8. REMOVE V-BANK COVER SUB-ASSEMBLY See: Engine/Service and Repair/Removal and Replacement/Engine Assembly/Removal
9. REMOVE NO. 2 AIR CLEANER INLET See: Engine/Service and Repair/Removal and Replacement/Engine Assembly/Removal
10. REMOVE NO. 1 AIR CLEANER INLET See: Engine/Service and Repair/Removal and Replacement/Engine Assembly/Removal
11. DISCONNECT CABLE TO NEGATIVE BATTERY TERMINAL See: Engine/Service and Repair/Removal and Replacement/Engine
Assembly/Removal
12. REMOVE BATTERY See: Engine/Service and Repair/Removal and Replacement/Engine Assembly/Removal
13. REMOVE HOOD CUSHION CENTER See: Body and Frame/Bumper/Front Bumper/Service and Repair/Removal and Replacement/Removal
14. REMOVE FRONT BUMPER ASSEMBLY See: Body and Frame/Bumper/Front Bumper/Service and Repair/Removal and
Replacement/Removal
15. REMOVE RADIATOR RESERVE TANK ASSEMBLY
(a) Disconnect the radiator reserve tank hose from the radiator.
(b) Disconnect the 2 clamps and remove the bolt and radiator reserve tank from the radiator.