RX 350 FWD V6-3.5L (2GR-FE) (2010)
(a) Connect the outlet oil cooler hose to the radiator.
9. CONNECT INLET OIL COOLER HOSE
(a) Connect the clamp and inlet oil cooler hose to the radiator.
10. CONNECT NO. 2 RADIATOR HOSE
(a) Connect the No. 2 radiator hose to the radiator.
11. CONNECT NO. 1 RADIATOR HOSE
(a) Connect the No. 1 radiator hose to the radiator.
12. INSTALL RADIATOR RESERVE TANK ASSEMBLY
(a) Connect the radiator reserve tank hose to the radiator.
(b) Install the radiator reserve tank with the bolt and connect the 2 clamps to the radiator.
Torque : 5.3 Nm (54 kgf-cm, 47 in-lbf)
13. INSTALL FRONT BUMPER ASSEMBLY See: Body and Frame/Bumper/Front Bumper/Service and Repair/Removal and
Replacement/Installation
14. INSTALL HOOD CUSHION CENTER See: Body and Frame/Bumper/Front Bumper/Service and Repair/Removal and Replacement/Installation
15. INSTALL BATTERY See: Engine/Service and Repair/Removal and Replacement/Engine Assembly/Installation