RX 350 FWD V6-3.5L (2GR-FE) (2010)
(a) Align the mark plates (yellow) with the timing marks of the camshaft timing gear assemblies as shown in the illustration.
Text in Illustration
(b) Apply a light coat of engine oil to the bolt threads and bolt-seating surface.
(c) Align the knock pin of the camshaft with the pin hole of the camshaft timing gear assembly. Install the camshaft timing gear assembly and
camshaft timing exhaust gear assembly with the No. 2 chain sub-assembly installed.
(d) Using SST to hold the hexagonal portion of each camshaft, tighten the bolts of the camshaft timing gear assembly and the camshaft timing
exhaust gear assembly.
SST : 09922-10010
Torque : 100 Nm (1020 kgf-cm, 74 ft-lbf)
(e) Remove the pin from the No. 2 chain tensioner assembly.
13. INSTALL IDLE SPROCKET ASSEMBLY See: Service and Repair/Overhaul/Reassembly
14. INSTALL CHAIN SUB-ASSEMBLY See: Service and Repair/Overhaul/Reassembly
15. INSTALL CHAIN TENSIONER SLIPPER See: Service and Repair/Overhaul/Reassembly
16. INSTALL NO. 1 CHAIN TENSIONER ASSEMBLY See: Service and Repair/Overhaul/Reassembly
17. INSPECT VALVE TIMING See: Service and Repair/Overhaul/Reassembly
18. INSTALL TIMING CHAIN CASE OIL SEAL See: Service and Repair/Overhaul/Reassembly
19. INSTALL TIMING CHAIN COVER SUB-ASSEMBLY See: Service and Repair/Overhaul/Reassembly
20. INSTALL WATER INLET HOUSING See: Service and Repair/Overhaul/Reassembly
21. INSTALL NO. 1 FRONT ENGINE MOUNTING BRACKET LH See: Service and Repair/Overhaul/Reassembly
22. INSTALL OIL PAN SUB-ASSEMBLY See: Service and Repair/Overhaul/Reassembly
23. INSTALL OIL STRAINER SUB-ASSEMBLY See: Service and Repair/Overhaul/Reassembly
24. INSTALL NO. 2 OIL PAN SUB-ASSEMBLY See: Service and Repair/Overhaul/Reassembly
25. INSTALL CYLINDER HEAD COVER SUB-ASSEMBLY See: Service and Repair/Overhaul/Reassembly