RX 350 FWD V6-3.5L (2GR-FE) (2010)
Drive Belt: Service and Repair
Removal
Up to 08/2009
2GR-FE ENGINE MECHANICAL: DRIVE BELT: REMOVAL
1. PRECAUTION (w/ Air Suspension)
NOTICE:
Be sure to read Precaution thoroughly before servicing See: Steering and Suspension/Suspension/Service Precautions/Air
Suspension System.
2. REMOVE FRONT WHEEL RH
3. REMOVE FRONT FENDER LINER RH
4. REMOVE FRONT FENDER APRON SEAL RH See: Service and Repair/Removal and Replacement/Engine Assembly/Removal
5. REMOVE V-RIBBED BELT
(a) Release the V-ribbed belt tension by turning the V-ribbed belt tensioner counterclockwise, and remove the V-ribbed belt from the V-ribbed
belt tensioner.
(b) While turning the V-ribbed belt tensioner counterclockwise, align with its holes, and then insert a 5 mm bi-hexagon wrench into the holes to
fix the V-ribbed belt tensioner.
From 08/2009
2GR-FE ENGINE MECHANICAL: DRIVE BELT: REMOVAL
1. PRECAUTION (w/ Air Suspension)
NOTICE:
Be sure to read Precaution thoroughly before servicing See: Steering and Suspension/Suspension/Service Precautions/Air
Suspension System.
2. REMOVE FRONT WHEEL RH
3. REMOVE FRONT FENDER LINER RH
4. REMOVE FRONT FENDER APRON SEAL RH See: Service and Repair/Removal and Replacement/Engine Assembly/Removal
5. REMOVE V-RIBBED BELT
(a) Release the V-ribbed belt tension by turning the V-ribbed belt tensioner counterclockwise, and remove the V-ribbed belt from the V-ribbed
belt tensioner.