RX 350 FWD V6-3.5L (2GR-FE) (2010)
/Page-928001.png)
Oil Pressure Sender: Service and Repair
Removal
Up to 08/2009
2GR-FE LUBRICATION: OIL PRESSURE SWITCH: REMOVAL
1. PRECAUTION (w/ Air Suspension)
CAUTION:
Be sure to read Precaution thoroughly before service See: Steering and Suspension/Suspension/Service Precautions/Suspension
Control System.
2. REMOVE FRONT WHEEL RH (w/ Oil Cooler)
3. REMOVE NO. 1 ENGINE UNDER COVER (w/o Oil Cooler)
4. REMOVE FRONT FENDER LINER RH (w/ Oil Cooler)
5. REMOVE FRONT FENDER APRON SEAL RH (w/ Oil Cooler) See: Service and Repair/Removal and Replacement/Engine Assembly/Removal
6. REMOVE ENGINE OIL PRESSURE SWITCH ASSEMBLY (w/o Oil Cooler)
(a) Disconnect the oil pressure switch assembly connector.
(b) Using a 24 mm deep socket wrench, remove the oil pressure switch.
7. REMOVE ENGINE OIL PRESSURE SWITCH ASSEMBLY (w/ Oil Cooler)
(a) Disconnect the oil pressure switch assembly connector.
(b) Using a 24 mm deep socket wrench, remove the oil pressure switch.
From 08/2009
2GR-FE LUBRICATION: OIL PRESSURE SWITCH: REMOVAL
1. PRECAUTION (w/ Air Suspension)
CAUTION:
Be sure to read Precaution thoroughly before service See: Steering and Suspension/Suspension/Service Precautions/Suspension
Control System.
2. REMOVE FRONT WHEEL RH (w/ Oil Cooler)
3. REMOVE NO. 1 ENGINE UNDER COVER (w/o Oil Cooler)
4. REMOVE FRONT FENDER LINER RH (w/ Oil Cooler)
5. REMOVE FRONT FENDER APRON SEAL RH (w/ Oil Cooler) See: Service and Repair/Removal and Replacement/Engine Assembly/Removal
