RX 350 FWD V6-3.5L (2GR-FE) (2010)
Torque : 21 Nm (214 kgf-cm, 15 ft-lbf)
(d) Connect the connector to the intake air control valve assembly.
(e) Connect the ventilation hose and vacuum hose.
(f) Connect the 2 water by-pass hoses to the throttle body assembly.
(g) Connect the vacuum hose clamp and fuel vapor feed hose.
(h) Connect the throttle body assembly connector and wire harness clamp to the throttle body assembly.
(i) Connect the union to connector tube hose.
6. INSTALL AIR CLEANER ASSEMBLY
(a) Install the air cleaner assembly See: Powertrain Management/Fuel Delivery and Air Induction/Throttle Body/Service and Repair/Installation.
7. INSPECT FOR FUEL LEAK